We made a new Application Note to show how you can download your firmware to Flyport without any programmer, simply using Serial (UART) communication.
You can find it here OP-AN-16 How to use the Serial Bootloader.pdf
Ok, following this application I know that I can reset the micro and send data to it but... there is an application to dowload the firmware, without IDE?
Claudio wrote:A simple GUI for FW download without IDE is on our roadmap. I think in 1-2 months we will be able to release it as we did it for the standard Flyport
Ok, thanks. I'm very interseted about that.
The link provided in your post is not working. I believe the new link is http://iot.openpicus.com/site/tools.
I am using Flyport Pro Ethernet and would like to use Firmware downloader Flyport PRO v0.9 found in guipro.zip. But, when I try to download the firmware, I am getting following error
File timestamp: 08/10/2015 18:51:27
Hex-file successfully parsed
Hex file validated...OK!
Unknown port: COM5
This port (COM5) is working correctly with the IDE (OpenPicus Flyport IDE v.2.9.0 - PRO).
Could you please help me.
There are 10 types of people in the world: those who understand binary, and those who don't.
Thank you very much for the reply.
The tool works after unblocking the zip file.
Copyright 2013 © iomote srl VAT IT02510540418 - All rights reserved - email@example.com - privacy